HOW IT WORKS

THE GUESTPAW DOG TOILET OPERATES IN 4 CONTROL MODES SELECTABLE THROUGH THE CONTROL PANEL​

Manual control

« Hand » Push Button

Remote control

« Hand » Push Button

Auto control

« Auto» Push Button

RFID control

« RFID » Push Button

Default mode is "Manual control mode".

 

To activate the « Automatic Control » or « RFID Control » mode, the swing panel must be in the open position and the dog toilet must not be on « Safety Stop », then press the relevant push-button.

You can return to the « Manual Control » mode at any time by pressing the « Hand » push-button.

The « Automatic control mode » and the « RFID control mode » are fully automatic modes and do not require any human action.

Manual control mode

Open and close the swing panel using the relevant piezo push-buttons or the key fob remote control.

The wash cycle will start after the swing panel is closed, only if the presence of the dog on the swing panel was detected by the logic system while the swing panel was in the open position.

The swing panel can be reopened as soon as the wash cycle is complete.

This mode is usefull for the training of the dog

Automatic control mode

The swing panel remains in the open standby position.

When the dog climbs onto the swing panel, the logic system detects its presence.

When the dog gets off the swing panel, the swing panel will close after a configurable time delay; then the wash cycle will occur.

After the wash cycle, the swing panel will open and will remain in the open standby position.

This mode is useful in wide spaces

RFID control mode

The dog must wear the RFID Guestpaw tag attached to its collar.

The swing panel remains in closed standby position.

When the dog enters the RFID antenna range for a few seconds, the swing panel will open and will remain open as long as the dog will remain in the RFID range.

When the dog leaves the RFID range, the panel closes after a configurable time delay and will remain in the closed standby position.

The wash cycle will occur after the swing panel is closed only if the presence of the dog on the swing panel was detected by the logic system while the swing panel was in the open position.

This mode is useful in small spaces such as the passageway of a ship.

Special Features 

24Vdc Electrical Supply Overload Safety
Watertight Built-In Electronic Cabinet Anti Pinch Safety
Soft Start & Soft Stop Swinging Panel Automatic Anti-Roll Closing
Automatic Night Light IP68 Piezo Push-Buttons
Water Jet Cleaning IP68 Limit & Load Switches
Built-In Discharge Vortex Pump IP68 Cable glands
Top Class Artificial Turf Optical Level Switches
Polished Stainless Steel
Coming Soon : Carbon Fiber / Epoxy
Winter Cover

And far more …..